No Battery, No Problem – How To Hit a Vape Cart without a Working Battery
Cartridges have made a formidable impact in the world of cannabis. The convenience of dab on the go has made this method of consumption hugely popular. You can easily acquire disposable wax cartridges. Just ensure they are from reputable sources and not shady sellers on the black market. In addition to the cartridge, you’ll also require a battery. These batteries are usually more affordable than cartridges and can be easily procured.
While some may have access to a wax cartridge, finding a compatible battery can be a challenge. It’s frustrating when you’re left without the means to enjoy your cartridge, as I can attest from my experience of having a dead battery and a faulty charger. But don’t despair! You can still get the desired experience with a few everyday household items. Although, it’s worth mentioning that a cartridge is an absolute must. Unfortunately, there’s no alternative to that.
A word of caution: As long as you heed the instructions carefully, everything will be safe and secure. However, carelessness could lead to potential harm. If you have any misgivings about the process, it’s best to refrain from attempting it at all. Instead, opt to purchase a battery from a reliable source. Your well-being is of utmost importance.
What is a CART?
Let’s start by explaining what a cartridge is for those who may not be familiar. Feel free to move on to the next section if you’re already in the know.
The cartridge is a crucial component in vaping, second only to the battery. A cartridge, also known as a “cart,” is a pre-filled glass container that holds cannabis oil or concentrates. Usually sold in 0.5g or 1g sizes, carts come in a diverse range of popular strains and are beloved for their potency and tasty vapor.
Items You’ll Need
You’ll need some everyday household items to hit a cartridge without a battery. Here’s what you’ll require:
A USB cable
First, locate a USB cable you no longer use – it will be cut during the process. Next, arm yourself with a pair of scissors. Finally, get some nail clippers, which will serve as a budget-friendly wire stripper. If you already have a wire stripper, that works too!
How To Hit a Cart Without Battery
Before you begin, a final word of caution: It’s vital to read and follow the instructions thoroughly. Although the process is straightforward, a single misstep could harm or damage yourself or your environment. However, if you take the time to follow each step carefully, you’ll successfully achieve the desired outcome – a safe and elevated experience.
Step 1: Snip the Cable
Ensure the USB cable is unplugged before you start. Once you’ve confirmed that, take your scissors and slice open the cable. Cut the end that is opposite the USB connection. For instance, if you’re using a charging cable, cut off the lot you usually would insert into your phone. You can keep the cable short or leave it longer. It’s up to you. However, keep it lengthy for added convenience.
Step 2: Trim the Wires Properly
After you’ve cut off the top part, continue cutting around the wires without cutting them themselves. Instead, you should remove the rubber surrounding them. There will be two wires – one red and one black. If you’ve successfully trimmed the rubber, you should be able to manipulate and separate each wire. Cut the rubber down to about an inch from the tip of the wires, with each wire approximately 1 cm in length.
Step 3: Expose the Copper Wires
Now’s the time to put your nail clippers (or wire strippers) to work. Using them, carefully remove the colored part from the copper within the wires. To do this, take hold of the tips of both colored wires with your clippers and gently pull upwards. Be very delicate, as carelessness could result in clipping the wire too short and having to start over. If all goes well, you should now have the copper wires exposed.
Step 4: Turn the Cable into a Power Source
Finally, the moment you’ve been waiting for! Plug in the USB end of your modified cable into a computer or laptop (it’s said that using an outlet can be risky). Once it’s connected, take the red wire and insert the copper end into the hole in your cartridge. Then, take the black wire and touch the copper to any metal surface on the bottom of the cartridge. When you make contact, your cartridge should be fully operational, delivering an amazing vaping experience!
Using a cut-up USB cable as a substitute battery for your wax cartridge is a daunting task. Still, with a few household items and a bit of patience, it can be a simple solution to the frustrating problem of being unable to get high. Whether you’ve forgotten your battery or the one you have has died, this method is a quick and efficient way to get the job done.
However, it’s essential always to follow the steps carefully and use caution when handling the wires. Remember, safety should always be the top priority, so if you’re unsure of anything, it’s always best to err on the side of caution and avoid the process altogether.
In the end, the satisfaction of being able to enjoy your wax cartridge without any hindrances is genuinely priceless. Whether you’re a seasoned stoner or just a beginner, this method will come in handy for those times when you need a quick fix. So, go ahead and give it a try, and who knows, maybe you’ll discover a newfound appreciation for the art of smoking.